Ex radio pull-wire switch Ex RF 95 WH/90°
- Product Code: Ex RF 95 WH/90°
- Availability: In Stock
Ex radio pull-wire switch Ex RF 95 WH/90°
Features/Options
- Ex zone 1 and 2, as well as 21 and 22
- Thermoplastic enclosure
- Transversely slotted mounting holes
- To EN 50 047
- Output signal can be individually configurated at the receiver
- EnOcean-protocol
- Data rate 120 kbps
- No power supply, no wiring and pipe laying required
- Multi-network capable
Product image
Technical Data
Standards | EN 60947-5-1; EN 61000-6-2; EN 301 489-1; EN 301 489-3; EN 300 220-2; EN 60079-0; EN 60079-11; EN 61241-11 |
---|---|
Enclosure | Glassfibre reinforced thermoplastic, self-extinguishing UL 94-V0 |
Cover | Glassfibre reinforced thermoplastic, self-extinguishing UL 94-V0 |
Degree of protection | IP 65 per IEC/EN 60529 |
Protocol | EnOcean |
Ambient temperature | -20 ºC … +60 °C |
Switching frequency | approx. 9000 telegrams at repetitions/h |
Voltage supply | Electrodynamic energy generator |
Frequency | 868.3 MHz |
Transmission power | max. 10 mW |
Data rate | 120 kbps |
Bandwidth channel | 280 kHz |
Sensing range | max. 300 m outside, max. 30 m inside |
Mechanical life | > 1 million operations |
Actuating time | min. 80 ms |
Note | no status signal |
Ex marking | II 2G Ex ib IIC T6 Gb II 2D Ex ib IIIC T80°C Db |
Approvals | BVS 08 ATEX E 111; IECEx BVS 08.0048 |
Ordering details.
Ex radio pull-wire switch
Ex RF 95 WH/90° - 3.2 m nylon pull-wire with rubber ball