MCOUP Programmable Universal Transducer
- Product Code: MCOUP
- Availability: In Stock
MCOUP Programmable Universal Transducer
ON-SITE FULLY PROGRAMMABILITY
These transducers are on-site fully programmable by using a standard USB interface
and a remote simple configuration software. On request available with RS485 ModBus Protocol.
The programmability includes the following function:
- Type (single or three phase, 3 or 4 wires, balanced or unbalanced load, even distorted waveforms)
- Nominal value of inputs (voltage 57÷400V and current 1÷5A with automatic switching of the gains)
- Current and voltage transformer ratios
For each output (indipendent)
- Output type (V or mA)
- Rated output value (eg.: 0…+/-1mA, 0…+/-5mA, 0…+/-10mA, 0…+/-20mA, 4…20mA;
0…+/-1V; 0…+/-10V, 2…10V, etc)
- Measure to be associated to the output, selected from among those available (eg.: voltage;
current; powers; power factor, etc.). See table.
- The start and full scale output values (eg. -25…0…100kW; 45…50…55Hz; 0.5C...1...0.5L; etc.)
For alarm output:
- Operating mode (minimum, maximum or a s watch-dog)
- Variable to be monitored
- Threshold level
- Operating delay
Or to retransmit the energy counting:
- Type of energy (active or reactive)
- Weight (eg 1 pulse = ... kWh)
For the serial interface
- Local address
- Communication parameters