Ex-e equipments - enclosures
- Product Code: Ex-e equipments
- Availability: In Stock
Presentation
The enclosures are in conformity with the following norms : EN60079-0 : 2006, EN 61241-0 : 2006, EN 60079-7 : 2007 et EN61241-1 : 2004.
They are suitable for use in ATEX zone 1-21 or 2-22. They are provided a.o. for chemical plants, petrochemical plants, pharmaceutical plants and food industries where severe and corrosive environments are found.
They can be equiped with bus bar, Ex-i, Ex-d or Ex-e components. On request a power dissipation sheet is available.
Technical data
Made of painted carbon steel, stainless steel 304L or 316L (sanded or painted), they are available in several dimensions. The wall thickness varies between 15/10 for the enclosures of 200 or 300mm depth and 20/10 for enclosures of 400 to 600mm depth. The door is reinforced.
They are provided with special hinges, one mounting board, a passing through earth stud and wall mounting holes. They can also be mounted on support. The tightness is done by a large polyurethan gasket.
Holes for pushbuttons, lamps, cable glands, … can be bored on request
The enclosures are in conformity with the following norms : EN60079-0 : 2006, EN 61241-0 : 2006, EN 60079-7 : 2007 et EN61241-1 : 2004. They are suitable for use in ATEX zone 1-21 or 2-22. They are provided a.o. for chemical plants, petrochemical plants, pharmaceutical plants and food industries where severe and corrosive environments are found. They can be equiped with bus bar, Ex-i, Ex-d or Ex-e components. On request a power dissipation sheet is available. Made of painted carbon steel, stainless steel 304L or 316L (sanded or painted), they are available in several dimensions. The wall thickness varies between 15/10 for the enclosures of 200 or 300mm depth and 20/10 for enclosures of 400 to 600mm depth. The door is reinforced. They are provided with special hinges, one mounting board, a passing through earth stud and wall mounting holes. They can also be mounted on support. The tightness is done by a large polyurethan gasket. Holes for pushbuttons, lamps, cable glands, … can be bored on request type high wide depth For gas zone Ex e II T6/T5, Ex e ia IIC T6/T5 or Ex e [ia]IIC T6/T5 Ex ed II T6/T5, Ex ed ia/ib IIC T6/T5 or Ex ed [ia/ib]IIC T6/T5 Ex em II T6/T5, Ex em ia/ib IIC T6/T5 or Ex em [ia/ib]IIC T6/T5 For dust zone Ex tD A21 IP6x T80°C/95°C · Mounting plate for cable glands · Drilling on request · Installation of din rails, cable trays, … · Mounting and assembling KER-0604-2 600 400 200 KER-0606-3 600 600 300 KER-0806-x 800 600 300 (400 - 600) KER-0808-x 800 800 300 (400 - 600) KER-1006-x 1000 600 300 (400 - 600) KER-1008-x 1000 800 300 (400 - 600) KER-1010-x 1000 1000 300 (400 - 600) KER-1206-x 1200 600 300 (400 - 600) KER-1208-x 1200 800 300 (400 - 600) KER-1210-x 1200 1000 300 (400 - 600) KER-1212-x 1200 1200 300 (400 - 600) KER-1506-x 1500 600 300 (400 - 600) KER-1508-x 1500 800 300 (400 - 600) KER-1510-x 1500 1000 300 (400 - 600) KER-1512-x 1500 1200
Standard dimensions (other on request)
Presentation
Technical data
Markings
Options & accessories