‘FAW’ Hazardous Area Air Warmers
- Product Code: FAW
- Availability: In Stock
‘FAW’ Hazardous Area Air Warmers
The FAW range offers a versatile lightweight air warming solution for small work and storage areas located in Zone 1 and Zone 2 Hazardous Areas. The range is suitable for use with 1 phase or 3 phase power supplies up to 440 volts. The range can also be configured for use with DC power supplies.
Downloads:
Datasheet: ex-baltic.com/files/FAW-Hazardous-Area-Air-Warmers-1.pdf
ATEX Certificate: ex-baltic.com/files/LCIE-00-ATEX-6013-X.pdf
Installation Manual: ex-baltic.com/files/iom-faw-and-stw-series-air-warmers-and-hft-series-thermostats.pdf
Datasheet: ex-baltic.com/files/FAW-Hazardous-Area-Air-Warmers-1.pdf
ATEX Certificate: ex-baltic.com/files/LCIE-00-ATEX-6013-X.pdf
Installation Manual: ex-baltic.com/files/iom-faw-and-stw-series-air-warmers-and-hft-series-thermostats.pdf
Features
Certified to meet the requirements of the ATEX Directive 94/9/EC and IECEx
Lightweight enclosure certified weatherproof to IP66
Suitable for 1 phase or 3 phase (3 or 4 wire) or DC power supplies
Temperature classes T2, T3, and T4 available
Suitable for floor or wall mounting
A 20mm cable entry is provided as standard, additional entries can be provided as required
Powder coated finish
Optional range of Flameproof room thermostats can also be provided
Suitable for ambient temperatures from -60°C to +60°C (subject to conditions to be discussed with sales engineer)
Typical Applications
Aircraft hangers
Fuel servicing areas
Chemical plants
Offshore installations
Battery stores
Gas installations
Paint/solvent stores
Specification
Rating
250W to 3kW
Certification
ATEX certified Ex II 2 G
IECEx & ATEX certified Ex’e’ II T2 to T4
IEC/EN60079-0 & IEC/EN60079-7
IECEx & ATEX certified Ex’e’ II T2 to T4
IEC/EN60079-0 & IEC/EN60079-7
Enclosure
Lightweight stainless steel or coated mild steel
Controls
If required the heaters can be controlled from the EXHEAT® range of remote mounted thermostats available for use in Safe or Hazardous Areas
Mounting
Support feet are pre-drilled and suitable for floor mounting supplied as standard (wall mounting brackets available on request)
Voltage
1 phase: 230 to 254V or 110V
3 phase: 400 to 440V
3 phase: 400 to 440V