‘FP’ Rod-Type Immersion Heaters
- Product Code: FP Rod-Type Immersion
- Availability: In Stock
‘FP’ Rod-Type Immersion Heaters
The FP range of Flameproof rod-type immersion heaters is a highly adaptable solution that can be customised to suit the process requirements of our clients. They are suitable for heating all types of process liquids and gases which are non-corrosive to the materials of construction.
Downloads:
Datasheet: ex-baltic.com/files/FP_Hazardous-Area-Flameproof-Industrial-Immersion-Heater.pdf
ATEX Certificate: ex-baltic.com/files/LCIE-01-ATEX-6056-X-3.pdf
Installation Manual: ex-baltic.com/files/iom-industrial-immersion-heater-2.pdf
Datasheet: ex-baltic.com/files/FP_Hazardous-Area-Flameproof-Industrial-Immersion-Heater.pdf
ATEX Certificate: ex-baltic.com/files/LCIE-01-ATEX-6056-X-3.pdf
Installation Manual: ex-baltic.com/files/iom-industrial-immersion-heater-2.pdf
Features
Certified to meet the requirements of the ATEX Directive 94/9/EC and IECEx
Mild steel or 316 stainless steel terminal enclosure with weatherproof protection to IP65
Choice of built in process temperature sensors
Suitable for ambient temperatures from -50°C to +60°C
Mounting of the heater can be by a threaded boss or an industry standard flange
Designed for horizontal installation (vertical mounting version available on request)
Can be supplied with the terminal box mounted away from the fixing boss/flange for high process temperatures
Typical Applications
Pre-heating oil/water
Processing equipment
Cleaning and rinsing tanks
Heating medium
Boiler equipment
Frost protection
Heat transfer systems
Tank heating
Specification
Certification
ATEX certified Ex II 2 G/D
IECEx & ATEX certified Ex’d’ IIC T1 to T6 Ex tD A21 IP66 T450 to 85°C
CSA certified Class I, Div 1, Gas Groups A, B, C & D
EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 61241-0 & EN/IEC 61241-1
CCOE (India) & KGS (Korea)
IECEx & ATEX certified Ex’d’ IIC T1 to T6 Ex tD A21 IP66 T450 to 85°C
CSA certified Class I, Div 1, Gas Groups A, B, C & D
EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 61241-0 & EN/IEC 61241-1
CCOE (India) & KGS (Korea)
Enclosure
Mild steel or 316 stainless steel, external and internal earths, screwed terminal cover, finished in epoxy paint (if required)
Elements
A choice of rod-type elements comprising of 80/20 nickel chrome resistance wire, compacted in high purity magnesium oxide insulating powder and encased in either Incoloy or stainless steel sheath, secured by either brazing or welding depending upon the process application
Controls
Heater over-temperature protection is fitted as standard (optional process temperature sensing devices can be incorporated in the form of thermostats, RTD’s or thermocouples)
Mounting
Any threaded boss or flange in any material can be specified within the limits of the design parameters
Heater terminal box can be either ‘direct-on’ or ‘stand-off’, depending on process temperature
Heater terminal box can be either ‘direct-on’ or ‘stand-off’, depending on process temperature
Rating
To suit process requirements
Voltage
Any electrical supply up to 690V